Home Categories Send inquiry

What is the use of steam heating in sewage treatment?


How to use a steam generator to heat sewage treatment? Some companies will produce wastewater during the processing and production process. The steam generator is used as a supporting device for sewage treatment equipment to form powdery salt-like crystals after heating, which facilitates transportation and reduces risks. , and the crystal can be reused as industrial fertilizer.

It can be seen that meeting sewage discharge standards is not as difficult as imagined. Breaking through traditional understanding, sewage treatment uses steam generators to heat industrial waste into industrial fertilizer. It not only solves the big problem of environmental pollution, but also turns waste into treasure. Achieve business profitability.

02

The steam generator is a general-purpose equipment with a wide range of uses. Why does the steam generator need to be drained regularly and how to drain it? The water used for steam generators will also vary depending on the environment in which it is used. Lake water, river water, tap water or groundwater are all used. These untreated water contain many pollutants, which accumulate over time to form precipitates and remain inside the steam generator. If not Dealing with it promptly is a safety hazard. In particular, the industrial application of steam generators not only has many uses, but also takes a long time. Almost most production requires a continuous supply of steam. It operates under high temperature and high pressure for a long time, and the sewage discharge work is not in place, and the destructiveness of accidents is also will be larger.

The problem of why the steam generator needs to be discharged regularly has been solved, but how should the discharge be performed? The sewage discharge system removes impurities from the water in the machine and keeps the chemical composition content within the specified range. Its sewage discharge methods are divided into two types: continuous sewage discharge and regular sewage discharge. The former continuously discharges water with high salt concentration, reducing sodium salt, chloride ions, alkaline ions, and suspended solids in the water to control water quality; the latter discharges sewage in a shorter time and mainly removes impurities, rust, dirt and other sediments at the bottom. things. The two sewage discharge parts are different and the impurities they target are also different, so they are both necessary.

23

These issues need to be paid attention to in sewage discharge work. When the sewage discharge volume is large and the internal water level is lower than the water level or the pot is dry, the water pump cannot be started. At this time, water must not be added to the equipment. Water can only be added manually after cooling. In short, maintaining the safe operation of the steam generator and ensuring the service life of the machine is the fundamental reason why the steam generator needs to be discharged regularly.