The mold is heated by steam, and the molding efficiency of drone parts is high without damage

UAV is the abbreviation of unmanned aircraft, which is an unmanned aircraft that uses radio remote control equipment and its own program control device. From a certain point of view, UAVs can complete complex aerial missions and various load tasks under unmanned conditions, and can be regarded as “air robots”.
Therefore, in the manufacturing process of drones, the process requirements are extremely high, and the production and molding of each component must not be sloppy. Nobles steam generator can realize one-button precise temperature control and pressure control. During the process of heating the mold to shape the parts, it can adjust the temperature at any time, provide heat source continuously, improve the production efficiency and ensure the quality of the parts forming.
Anyang Hao×Aviation Technology Co., Ltd. mainly produces various accessories for drones. During the production process, steam generators are needed. After many comparisons, the company finally chose to cooperate with Noves, and purchased 3 sets of Noves electric heating steam generators, which were used together with the heat press to heat the mold, so that the parts could be molded quickly and with high quality. They connected the 150°C steam generated by the 72kw steam generator to the hot press (tabletop 1mx2.5m), and heated the mold to shape the drone parts.

It takes 1-2 hours for small molds (placed according to the surface area of ​​the hot press table) to be heated and formed. The mold heating mainly goes through four stages: it takes about 15 minutes to heat up from 80°C to 100°C; it takes 30 minutes to heat up to 100°C to 130°C, The temperature is kept at 130°C for 30 minutes; the temperature is lowered to 80°C for 20 minutes, and finally the mold is formed. It takes about 5 hours for a large mold, and its temperature requirements are not the same as those of a small mold.
The outer casing of Nobeth electric heating steam generator is made of thickened steel plate and special painting process, which is exquisite and durable, and has a very good protection effect on the internal system. Colors can also be customized according to your needs; the interior adopts a water and electricity separation design, and the functional modules The independent operation can enhance the stability of the operation and prolong the service life of the product; the internal electric control system can be operated with one button, the temperature and pressure can be controlled, the operation is convenient and fast, saving a lot of time and labor costs, and improving the production efficiency; the power can be adjusted according to Customized multi-level adjustment, different production needs to adjust different gears, saving production costs. Nobeth electric heating steam generator is used in the molding of unmanned parts with high heating efficiency, good effect and guaranteed quality. In other fields such as food processing, biopharmaceuticals, and chemical production, Nobeth electric heating steam generators also have good effects, and are the first choice for new fully automatic, high-efficiency, energy-saving and environmentally friendly steam generators that replace traditional boilers.