Steam generator bridge maintenance

Bridge maintenance steam generator
Bridge maintenance steam generator is also called bridge/concrete curing device. It is widely used in road maintenance projects and is easy to use. Below, Yugong Machinery will introduce the product to you in detail:

1.Material
Furnace design: The inner tank is designed with a service life of 10 years, the gas storage space is 30% larger, the steam is pure and moisture-free, the thermal efficiency reaches more than 98%, the steam is pure, four-fold guarantee, long service life, the outer shell is made of thickened high-quality steel plate, using Special spray painting process, beautiful and durable, easy to use, the whole machine is easy to install after leaving the factory, and can be operated freely without the need for professionals

2. Energy saving
It adopts a natural magnet all-copper float level controller, which resists oxidation regardless of water quality, has twice the service life, recovers waste heat, and saves more than 30% of electricity. It is small in size and has 100% pure steam without moisture. It heats up quickly and can be used in about 5 minutes. .

3. The lack of water in the water tank will automatically alarm, and the water pump will automatically stop working to prevent dry operation without water and extend the service life. The water level gauge is equipped with an observation light, which makes it more convenient and quick to observe the water level. The pressure control will automatically cut off the power and heat, and the spring valve will automatically shut down when the pressure is too high. Exhaust protection, independent water and electricity box, convenient maintenance and reliable

4. Convenience
The water tank can be filled with water automatically or manually.

Scope of application:

Widely used in road maintenance such as bridges, railways, concrete, highways, etc.

Maintenance of bridge maintenance evaporator

Use softened water and pure water during use, and do not use untreated sewage. It is strictly forbidden to use well water, river water, and lake water in the boiler, because there are many water mines without water treatment. Although some water looks clear to the eye, it is not Turbidity phenomenon, but after the water in the boiler is repeatedly boiled, the minerals in the water without water treatment will have a more severe chemical reaction, and they will stick to the heating tube and liquid level controller, which will produce the following situations:

There is too much dirt on the surface of the heating tube, which will shorten the heating time and consume electricity.

Excessive dirt on the surface of the heating tube will greatly reduce the life of the heating tube.Channel forming methods include steel pipe core pulling method, rubber hose core pulling method and buried pipe method.

If there is too much dirt on the liquid level controller, it will malfunction, stop working, and the heating tube will burn out.Boiler water with high hardness is very dangerous. It not only wastes fuel, but also causes more scale in the boiler liner and heating pipes, thus greatly shortening the service life of the boiler.

Tips: [Soft water: Water with a hardness lower than 8 degrees is soft water. (Contains no or less calcium and magnesium compounds)
Hard water: Water with a hardness higher than 8 degrees is hard water. (Contains more calcium and magnesium compounds)]