Q:What should be paid attention to before starting the steam boiler?

A:Today I will introduce to you the three major precautions for using professional steam boilers to help you better understand the use of steam boilers.
1. Pay attention to the water supply method: the water supply method is an important way to ensure the safe operation of the steam boiler. Therefore, pay attention to closing the water inlet valve of the return pipe when supplying water, and then turn on the circulating water pump to adjust the water pressure to an appropriate range before starting to inject clean water. After the system is filled with water, adjust the boiler water level to a normal state, so as to ensure that the performance of the easy-to-use steam boiler can be fully utilized.
2. Pay attention to the inspection before ignition: Before the steam boiler is ignited, all auxiliary equipment of the boiler must be inspected. Special attention should be paid to whether the valve opening is reliable to ensure smooth water circulation in the boiler and avoid excessive pressure caused by steam blockage. If the check valve is found to be seriously leaking during the inspection, it should be repaired or replaced in time, and it is not allowed to ignite rashly.

3. Pay attention to clean up the sundries in the water tank: the water quality heated by the steam boiler should be treated soft water. Some manufacturers use untreated tap water. During long-term use, some debris may be deposited in the water tank. If there is a lot of debris deposited, it may damage the water pump and block the valve. Before using a professional steam boiler, it is necessary to check whether there is a water level in the water tank and clean it in time to ensure a better heating effect and avoid the danger of excessive internal temperature and high air pressure in the boiler.
If the valve is blocked when the steam boiler is in use, it may cause the internal pressure of the steam boiler to soar. Pay attention to the water supply method when using it, check the deposit inside the boiler, and check it before ignition. Only by doing these three points can the hot water boiler exhaust be guaranteed smoothly and the boiler can operate normally.