How to solve the noise problem of industrial steam boilers？

Industrial steam boilers will produce some noise during operation, which will have some impact on the lives of surrounding residents. So, how can we reduce these noise problems during production operations? Today, Nobeth is here to answer this question for you.

The specific reasons for the noise caused by the industrial steam boiler blower are the gas vibration noise caused by the fan, the noise caused by the overall operating vibration, and the friction noise between the rotor and the stator. This is due to the noise caused by mechanical movement, which can be achieved by placing the blower in a soundproof The way inside the room is to deal with it.

Noise caused by industrial steam boiler exhaust devices: After the industrial boiler is used, under exhaust conditions, based on the high temperature and high pressure of the gas, jet noise is formed when it is ejected into the atmosphere.

Boiler water pumps make noise: This is due to the fact that the noise caused by the water flow in the pump system is caused by periodic pulsations at full speed, turbulence caused by high flow rates in the pump, or cavitation; noise caused by the structure is caused by the inside of the pump. Caused by mechanical vibration or vibration caused by liquid pulsation in the pump and pipeline.

Regarding the noise caused by the blower of the industrial steam boiler: a silencer can be added to the fan blade of the blower to semi-enclose the entire motor and block the way the noise is transmitted outwards from the casing. Therefore, it has a better silencing function and is helpful in reducing boiler noise. The reduction has a good effect.

For industrial steam boiler exhaust devices that cause noise: small hole injection mufflers can be implemented, and the mufflers can be installed at the vent pipe openings. In addition, when using an exhaust muffler, attention should be paid to the exhaust force and flow temperature of the muffler in accordance with the venting requirements. The requirements for steam are to maintain corresponding strength and corrosion resistance. When used in cold areas, attention must be paid to the risk of steam freezing blocking small holes and causing over-pressure venting, so corresponding safety measures must be implemented.

Noise caused by water pumps: Sound insulation and sound-absorbing layers can be installed on the walls and roofs of industrial steam boiler boiler rooms to deal with noise problems caused by water pump operation.