Application of steam generator in printing and dyeing industry

In the printing and dyeing industry, steam is very important—an energy-saving and clean energy source, which has the advantages of high thermal energy conversion efficiency, no waste water, and waste gas pollution. Compared with traditional steam, it has the characteristics of low energy consumption, high efficiency, low pollution, low emission, and renewable, and has been widely used by printing and dyeing enterprises. According to the different needs of printing and dyeing factories, steam generators can meet the production needs of different industries.

1. The high-temperature and high-pressure equipment of the steam generator has a working pressure greater than 4 MPa, which can ensure the normal operation of the machine.
2. The steam generator adopts a new type of high-efficiency electric heating element, which uses ultra-fine current to generate heat and heats the steam through internal electrodes. The thermal efficiency of the high-temperature and high-pressure steam output by it is high, which can reach more than 95%. 3. The steam generator adopts a fully automatic operation control system, which can realize a fully automatic operation mode. 4. The pressure control system of the steam generator adopts imported microcomputer controller and multiple protection functions to ensure safe operation. The steam generator is a special boiler used for high temperature in textile printing and dyeing equipment. Generally, it has 4 different pressure levels, which can meet the requirements of different industries for high temperature steam, and is suitable for the steam demand of the heating system in the printing and dyeing industry.
3. No wastewater discharge pollution, will not cause any impact on the environment. The thermal efficiency of the steam generator boiler is high. Under the same high temperature condition, the unit energy consumption is about 40% lower than that of the traditional boiler. Steam fuel will not produce waste water and waste gas during use, and will not cause waste water pollution problems. Therefore, printing and dyeing enterprises can use steam generators to replace traditional mechanical production links. Because the price of steam is lower, and energy can be saved. Therefore, it is widely used by printing and dyeing enterprises.
4. It has the functions of rapid heating, high-temperature steam, and conversion of high-temperature heat energy into high-temperature steam. This function enables the steam generator to achieve a wide range of super-temperature and high-intensity heating functions.
5. Easy to manage and maintain. As the textile industry pays more and more attention to energy conservation and emission reduction, printing and dyeing enterprises have begun to gradually promote the use of energy-saving clean energy. However, due to the large environmental pollution in the printing and dyeing industry, there are many unfavorable factors in the use of clean energy. In order to further promote the development of energy conservation, emission reduction and environmental protection in the printing and dyeing industry, my country will continue to vigorously promote the use of clean energy in the printing and dyeing industry. In this regard, we must combine the printing and dyeing industry Develop actual conditions to choose clean energy suitable for the printing and dyeing industry. For this reason, the over-temperature adjustable low-water-level pressure energy-saving steam boiler developed and produced by Guangdong Dechuang Technology Co., Ltd. adopts the German imported brand WBO over-temperature switch to control the steam temperature. The over-temperature alarm program is clearly set, and the over-temperature alarm prompt is intuitively displayed.
6. Safe and reliable, easy to operate, labor-saving, time-saving, labor-saving and time-saving.