Scale is very bad for gas steam generators, industrial air conditioners are the root cause of steam generator problems, and its impact is manifested in: it consumes a lot of fuel. This is mainly because the heat transfer coefficient of scale is only a few tenths of that of steel. Therefore, when the heating surface is scaled, the heat transfer is limited. In order to ensure the corresponding output of the steam generator, the temperature on the fire side must be increased. In turn, external radiation and smoke exhaust cause heat loss.
Descaling and cleaning, add the configured descaling and cleaning agent in a certain proportion to the circulating water of the cleaning tank, carry out cleaning and descaling of the steam generator, determine the cleaning cycle time and the amount of agent added according to the amount of scale, and confirm that all scales have been cleaned. Go to the next cleaning process.
Cleaning with clean water, after connecting the cleaning equipment to the gas steam generator, clean with clean water for 10 minutes, check the system status, whether there is leakage, and then clean the floating rust.
Remove from anti-corrosion cleaning, add surface stripping agent and slow-release agent in the circulating water of the cleaning tank according to a certain proportion, and cycle cleaning for 20 minutes to separate the scale from the cleaned parts, and carry out anti-corrosion treatment on the surface of the material without scaling, Avoid corrosion of the cleaning parts by the cleaning agent during descaling and cleaning.
Gas steam generator passivation coating treatment, add passivation coating agent, carry out passivation coating treatment on steam generator cleaning system, prevent corrosion of pipelines and components and new rust formation.
